Deal of the Day:

Miata Performance Exhaust

 - ISR Performance Circuit Spec Exhaust for Mazda Miata '94-'97 1.8L
ISR Performance Circuit Spec Exhaust for Mazda Miata '94-'97

Features 3 piece design resonated cat delete pipe Mid section and tail section are standard and there are no variations available. The exhaust features 2.5'' brushed stainless steel piping and flanges, and a polished stainless steel muffler with 4'' tip.

  • Brand: ISR Performance
  • ASIN: B01709G7BO
  • UPC: 813638022760
  • Part No: IS-CSEXH-NA
 - BORLA 11919 Exhaust System
BORLA 11919 Exhaust System

S-Type Axle-Back Exhaust System; 2.25 in.; Incl. Connecting Pipes/Mufflers/Hardware/2.5x4.13 in. Dual Round Angle-Cut Intercooled Tip; Dual Right Rear Exit;

  • Brand: Borla
  • ASIN: B01IDFMTCK
  • UPC: 808422219198
  • Part No: 11919
 - ISR Performance NA16 Circuit Spec Exhaust NA Mazda Miata 1.6L 89-93
ISR Performance NA16 Circuit Spec Exhaust NA Mazda Miata 1.6L

Features 3 piece design, a resonated front pipe which replaces your OEM catalytic convertor, as well as the mid section and tail section. The exhaust features 2.5'' brushed stainless steel piping and flanges, and a polished stainless steel muffler with 4'' tip.

  • Brand: ISR Performance
  • ASIN: B01MS87V2X
  • UPC: 813638023286
  • Part No: IS-CSEXH-NA16
 - Yonaka Mazda Miata 1990-1997 2.5
Yonaka Mazda Miata 1990-1997 2.5" Stainless Steel Performance Catback

YONAKA MOTORSPORTS Fully Polished Stainless Steel Catback Exhaust 2.5" Mandrel Bent Piping with 3.5" Tip Yonaka part# YMCB-MIA9097 Mazda Miata 1990-1997 Catback Exhaust Will fit: Mazda Miata 1990-1995 (direct bolt on) Mazda Miata 1996-1997 (direct bolt on w/ minor modification) Sound Clip OEM vs Yonaka http://youtu.be/ZtAibc2onmw ***Please note: The 1996-1997 Mazda Miata models have an extra o2 sensor in the midpipe section. This catback does NOT include the bung for installation of the o2 sensor. It will physically bolt up, but will require minor modifications for the addition of the bung to accommodate the o2 sensor. The bung can be purchased from your local parts supplier or mechanic for a very minimal cost. Your mechanic will simply drill a hole and weld on the bung for installation of the o2 sensor. For additional information please consult your local muffler shop or mechanic prior to purchasing this catback*** This Yonaka Motorsports catback exhaust system is made of fully polished stainless steel, with 2.5" OD mandrel bended piping, and a 3.5" tip. Expect a quiet, clean, deep hum, without that irritating mid range raspy sound. Direct bolt-on fit to OEM. All installation hardware is included. Brand new in the box, never installed. Yonaka Motorsports is a grassro...

  • Brand: Yonaka Motorsports
  • ASIN: B00IT3EKB0
  • Part No: YMCB-MIA9097
 - 1994-1997 MAZDA MIATA MX-5 1.8L JDM 2PC STAINLESS STEEL PERFORMANCE EXHAUST HEADERS SYSTEM + GASKET + BOLTS
1994-1997 MAZDA MIATA MX-5 1.8L JDM 2PC STAINLESS STEEL PERFORMANCE EXHAUST HEADERS SYSTEM + GASKET +

100% Brand new item, Never used or installed 2 Piece 4-2-1 Stainless steel performance exhaust header Made from high quality T-304 stainless steel w/ TIG welded CNC machined flanges Inlet Diameter: 1.50" X 2.25" (Oval) Outlet Diameter: 2.25" O2 Sensor bung insertion included Includes hardware shown in picture No installation guides are included, We highly recommend to seek professional installation

  • Brand: AJP
  • ASIN: B00KCA47P2
  • UPC: 634397661409
  • Part No: HDS-MZ72940CH
 - Mazda Miata Mx5 1.8L T3 T4 T3/T4 Performance Iron Exhaust Header Turbo Manifold
Mazda Miata Mx5 1.8L T3 T4 T3/T4 Performance Iron Exhaust Header Turbo

100% Brand New Items, Never Used Or Installed High Performance T3/T4 Flange Turbo Charger Cast Iron Header Manifold Kit Made By OEM Approved & ISO Certified Manufacturers With Materials That Meets Or Exceeds Strict OEM Requirements Improves Engine Performance And Increase Horsepower By Significantly Reducing Exhaust Flow Restriction Increase High Flow Air, Instantly Gain 10 -15 Hp. / Tq. Specifications (Estimated): Flange Type: Used Only With T3/T4 Flange External Wastegate Flange: 35mm/38mm *** NOTE: Some Cars May Require Modifications For The EGR Tube Depending On Model *** No Installation Guides Are Included, We Highly Recommend To Seek Professional Installation FITMENT 1994-2005 Mazda Miata 1.8L

  • Brand: AJP Distributors
  • ASIN: B0148KEA3U
  • Part No: TMF-MZ5941114BK-AMA-L1
 - Borla 14411 Cat-Back System Exhaust
Borla 14411 Cat-Back System

Borla's T-304 stainless steel high performance exhaust system is built to last under extreme conditions. Borla exhaust systems give you more power and torque, longer engine life, precision fit, and the distinctive "BORLA Sound of Power" recognized by automotive enthusiasts around the world.

  • Brand: Borla
  • ASIN: B000CIK8S4
  • UPC: 808422144117
  • Part No: 14411
 - Borla 140169 Cat-Back Exhaust System
Borla 140169 Cat-Back Exhaust

Borla Cat-Back exhausts feature patented, straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy and the distinctive Borla sound of power respected by motoring enthusiasts everywhere. Each system is built from premium austenitic stainless steel, superior to T-400 series knockoffs, to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. Best of all, Borla stands behind every system with a million-mile warranty. This exhaust has a piping diameter of 2.5, 2.25 inches and a split rear exit. It also features a single round rolled angle cut lined style tip of size 3.19 inches round x 6 inches.

  • Brand: Borla
  • ASIN: B001ET0O7A
  • UPC: 848422401698
  • Part No: 140169
 - Yonaka Mazda Miata 1990-1997 2.5
Yonaka Mazda Miata 1990-1997 2.5" Stainless Steel Performance Catback Exhaust (Powder Coated

YONAKA MOTORSPORTS Stainless Steel Catback Exhaust (w/ Matte Black Powder Coat Finish) 2.5" Mandrel Bent Piping with 3.5" Tip Yonaka part# YMCB-MIA9097-B Mazda Miata 1990-1997 Catback Exhaust Will fit: Mazda Miata 1990-1995 (direct bolt on) Mazda Miata 1996-1997 (direct bolt on w/ minor modification) Sound Clip OEM vs Yonaka http://youtu.be/ZtAibc2onmw ***Please note: The 1996-1997 Mazda Miata models have an extra o2 sensor in the midpipe section. This catback does NOT include the bung for installation of the o2 sensor. It will physically bolt up, but will require minor modifications for the addition of the bung to accommodate the o2 sensor. The bung can be purchased from your local parts supplier or mechanic for a very minimal cost. Your mechanic will simply drill a hole and weld on the bung for installation of the o2 sensor. For additional information please consult your local muffler shop or mechanic prior to purchasing this catback*** This Yonaka Motorsports catback exhaust system is made of stainless steel featuring a matte black powder coat finish, with 2.5" OD mandrel bended piping, and a 3.5" tip. Expect a quiet, clean, deep hum, without that irritating mid range raspy sound. Direct bolt-on fit to OEM. All installation hardware is included. Brand new in the box...

  • Brand: Yonaka Motorsports
  • ASIN: B01NBVSNXG
  • Part No: YMCB-MIA9097-B
 - OBX Performance Exhaust Turbo Manifold Header 89-94 Mazda Miata MX5 1.6L
OBX Performance Exhaust Turbo Manifold Header 89-94 Mazda Miata MX5

Product: OBX High Performance Racing Turbo Manifold (1pc.) Application: 1989-1994 Mazda Miata MX5 1.6L Specifications: Primaries: 2.0" - 2.2" OD Flange Inlet: 2.0" ID Port ID (Oval): 1.8" x 1.25" ID Flange Thickness: 0.40" Runner Wall Thickness: 16 Gauge (1.5mm) Greddy Type 14B Flange General Information: Improve performance, efficiency, and horsepower CNC-machined flange for precision fitment Mandrel bent for fast smoother exhaust flow Dual T.I.G. welded construction for stronger hold Individual ports for continuous even exhaust flow Accessories on photo are included No installation instruction included in this kit, recommend professional installation Product is intended to be install to the original stock exhaust setup, any modification or upgrade to the setup may cause fitment issues Comes With OBX Limited Life Time Warranty (Must fill out and return warranty card with a copy of the receipt and within 30 days of purchase date)

  • Brand: OBX Racing Sports
  • ASIN: B0771WZ161
  • UPC: 708036084147
  • Part No: 11-2003-5
Miata Performance Exhaust - SS Exhaust Header fits Mazda Miata STO Convertible 2D 1.8L
SS Exhaust Header fits Mazda Miata STO Convertible 2D

    SS Exhaust Header fits Mazda Miata STO Convertible 2D 1.8L
Miata Performance Exhaust - Manzo Mazda Miata MX-5 1999-2005 NB 1.8L Stainless Steel Axleback Exhaust System
Manzo Mazda Miata MX-5 1999-2005 NB 1.8L Stainless Steel Axleback Exhaust

    Fits vehicle: Mazda Miata MX-5 1999-2005 NB 1.8L BP4W 4Cyl. Performance cat-back exhaust systems are the perfect upgrade for your vehicle. Unrestricts airflow of the exhaust system to increase power and torque.
Miata Performance Exhaust - Corsa Performance 14999BRZ Xtreme Cat-Back Exhaust System; Dual Rear Exit; 3.5 in. Dia.; Incl. Muffler/Pipes/Clamps/Quad 5 in. Dual Wall Flat-Cut Pro-Series Bronze Tips;
Corsa Performance 14999BRZ Xtreme Cat-Back Exhaust System; Dual Rear Exit; 3.5 in. Dia.; Incl. Muffler/Pipes/Clamps/Quad 5 in. Dual Wall Flat-Cut Pro-Series Bronze

    Patented No Drone; Reflective Sound Cancellation [RSC] Technology. Custom Tuned/Aggressive Exhaust Note. Up To 16 Horsepower And 9 ft./lbs. Torque. 304 Stainless Steel Construction with Titanium Tips. Dual Walled; Bronze PVD Titanium Tips. Flows 33.5% Better Than Stock. Easy Bolt-On Installation. Detailed Printed Instructions Incl.; Full-Color Available Online. No Welding Required. Limited Lifetime Warranty. Made in the U.S.A.. No Drone At Cruise.
Miata Performance Exhaust - High Performance Stainless Steel Exhaust Header Manifold for Ford F150 5.4L 99 00 01 02 03 Heritage 04
High Performance Stainless Steel Exhaust Header Manifold for Ford F150 5.4L 99 00 01 02 03 Heritage

    The exhaust manifolds found in the 1999-2004 Ford F150 and F250 were designed to combine the exhaust gasses from each of the cylinders quickly with a manifold that was cost effective to produce. Our 4-1 Long Tube off-road headers are designed to allow the exhaust gasses to flow more freely from each 4 cylinder bank and combine in a more efficient manner. Tubing has been optimized for the 5.4L(330ci) engine. This creates a reduction in cylinder backpressure and improved exhaust gas velocity. These improvements free up lost horsepower and torque. An added benefit is a more performance oriented exhaust sound.Specification:Precision machined steel flanges that provide a tight seal at the head and allows a high flow rate through the primary tubesMade From High Quality T304 Stainless Steel For Strength & DurabilityConstructed With TIG Welded CNC Machine Flange For Percision & FitmentAll Tubing Is Mandrel-BentComes With EGR Bungs Insertion, O2 Sensor Insertion & Metal GasketPackage Included:1 x Set of Header Exhaust SystemHardware, such as Gasket(s) and Bolt(s)Fitment:99-04 Ford F-150 PickupLightning and Harley Davidson Edition 5.4L V8 Supercharged Models ONLY
Miata Performance Exhaust - SS Alexback Exhaust System for 99-05 Mazda Miata NA6CE 3.5
SS Alexback Exhaust System for 99-05 Mazda Miata NA6CE 3.5"

    SS Alexback Exhaust System for 99-05 Mazda Miata NA6CE 3.5" O.D.Tip
Miata Performance Exhaust - JEGS Performance Products 30414 Cat-Back 2-1/2 Dual Exhaust System 2001-2006 GM
JEGS Performance Products 30414 Cat-Back 2-1/2 Dual Exhaust System 2001-2006

    Cat-Back Exhaust System2001-2006 GM 2500HD/3500 Pickup 2WD/4WD 6.0L/8.1LCrew Cab Short Box2.5 in. Aluminized Steel TubingDual Exit Includes:(4) Tail Pipes(2) Extension Pipes(1) Muffler(10) Clamps(2) HangersHardware
Miata Performance Exhaust - SS Alexback Exhaust System for 90-97 Mazda Miata NA6CE 3.5
SS Alexback Exhaust System for 90-97 Mazda Miata NA6CE 3.5"

    SS Alexback Exhaust System for 90-97 Mazda Miata NA6CE 3.5" O.D.Tip
Miata Performance Exhaust - K&N 98-05 Miata Red Typhoon Short Ram Intake
K&N 98-05 Miata Red Typhoon Short Ram

    K&N's easy-to-install Typhoon air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tube comes in a red powder coat finish.
Miata Performance Exhaust - Pypes Performance Exhaust HVH11S Exhaust Hanger; 2.5 in.; Hardware Not Incl.; Natural 304 Stainless Steel;
Pypes Performance Exhaust HVH11S Exhaust Hanger; 2.5 in.; Hardware Not Incl.; Natural 304 Stainless

    2.5 in. Universal Muffler Hanger. 304 Stainless Steel. Lifetime Warranty. Sold Each.
Miata Performance Exhaust - MagnaFlow Conv DF Miata 94-97 1.8L
MagnaFlow Conv DF Miata 94-97

    MagnaFlow Conv DF Miata 94-97 1.8L
Miata Performance Exhaust - Honda Accord 4-Cyl Stainless Steel High Performance Exhaust Pipe
Honda Accord 4-Cyl Stainless Steel High Performance Exhaust

    The most restrictive part of any exhaust system is the catalytic converter. The stock catalytic converter is meant to filter the flow of exhaust gases to reduce the amount of harmful gases into the atmosphere. Because of this, lots of potential performance is restrained. High Flow Test Pipes eliminate the stock catalytic converter and reduce exhaust backpressure. The result brings out the vehicle's performance potential by giving it a free high flowing exhaust system.Specification:Dyno Proven Increases Low End Torque and Horse Powers; Instant Gain up to 10~15 Hp. / Tq.Inlet size: 2.25" / Outlet size: 2.25"Metal Gasket IncludedMade of High Quality T304 Polished Stainless Steel MaterialIncrease High Flow Air and Maximize PerformancePackage Included:1 x High Flow Test Pipe (Cat) and Hardware, such as Gasket(s) and Bolt(s) (ALL if necessary for Installation)Fitment:94-97 Honda Accord l4
Miata Performance Exhaust - Pypes Performance Exhaust PVR16S Reducers; 3 in. Header To 2.5 in. Pipe Collector; Polished Finish; Hardware Incl.; 304 Stainless Steel;
Pypes Performance Exhaust PVR16S Reducers; 3 in. Header To 2.5 in. Pipe Collector; Polished Finish; Hardware Incl.; 304 Stainless

    Exhaust PipeReducersReducers; 3 in. Header To 2.5 in. Pipe Collector; Polished Finish; Hardware Incl.; 304 Stainless Steel;FEATURES:Fully Polished 304 StainlessConnects 3 in. Header To 2.5 in. Exhaust Pipe14 in. Long Which Allows You To Connect Directly To Pypes X PipeLifetime WarrantyFully polished 304 stainless. Connects 3 in. header to 2 1/2 in. exhaust pipe. Ours are 12 in. long which allows you to connect directly to a Pypes X-pipe instead of having to use an additional piece of extra pipe. Sold in Pairs.Pypes Performance Exhaust supplies complete mandrel bent, performance exhaust systems for American performance vehicles ranging from the 1950's to the present day.Our systems and accessories are fabricated using stainless steel materials that will provide their owners with long-term service and satisfaction. Pypes products are backed by our limited lifetime warranty!We sweat the details! We offer a great price on high-quality stainless steel exhaust systems that are painstakingly designed to deliver great fit, sound and value!One of the principal ways of getting a lot of bang for your performance buck is to replace your car's compression-bent exhaust system with a mandrel bent system.The simple fact is that a mandrel bent exhaust system will flow twice as efficiently as a compression-bent system and we all know that efficient flow is one of the main ingredients of power.At Pypes Exhaust we offer just about everything you will need for your vehicle's exhaust. From manifolds/headers all the way to the tips, we got it all. We have mufflers that are tailored for the sound you are looking to hear. Look for our unique products, like the Pype Bomb, mid-muffler systems, tips, stacks, and the H & X Boxes.
Miata Performance Exhaust - For 01-05 Honda Civic Performance Stainless Steel Exhaust Header Kit EX EM ES EP 02 03 04
For 01-05 Honda Civic Performance Stainless Steel Exhaust Header Kit EX EM ES EP 02 03

    The exhaust manifold found on the 2001-2005 Honda Civic D17 SOHC VTEC 4 Cylinder Engine were designed to combine the exhaust gasses from each of the cylinders quickly with a manifold that was cost effective to produce. Our 4-1 off-road racing headers are designed to allow the exhaust gasses to flow more freely from each cylinder and combine in a more efficient manner. Tubing has been optimized for the 1.7L engine. This creates a reduction in cylinder backpressure and improved exhaust gas velocity. These improvements free up lost horsepower and torque. An added benefit is a more performance oriented exhaust sound.Specification:Precision machined steel flanges that provide a tight seal at the head and allows a high flow rate through the primary tubesMade From High Quality T304 Stainless Steel For Strength & DurabilityConstructed With TIG Welded CNC Machine Flange For Percision & FitmentAll Tubing Is Mandrel-BentComes With O2 Sensor Insertion & Metal GasketPackage Included:1 x Set of Header Exhaust SystemFitment:01-05 Honda Civic EX 1.7L
Miata Performance Exhaust - JBA PERFORMANCE EXHAUST Pontiac GTO 2004-06 LS Cat4ward Headers P/N 1809S
JBA PERFORMANCE EXHAUST Pontiac GTO 2004-06 LS Cat4ward Headers P/N

    HeadersCat4ward1-5/8 in Primary2-1/2 in CollectorStainlessNaturalGM LS-SeriesPontiac GTO 2004-06Kit
Miata Performance Exhaust - Pypes Performance Exhaust SGG50R Converter Back Exhaust System
Pypes Performance Exhaust SGG50R Converter Back Exhaust

    Stainless Steel Construction Resists Corrosion. Delivers The Ultimate In Sound And Performance. Provides Extra Punch In The Passing Lane. Fabricated Using The Highest Quality Materials. Ensures Maximum Exhaust Gas Flow Which Significantly Boost HP. Installation At Home Without Special Tools. Mandrel-Bent/ All Welded/ Built to Last. Lifetime Warranty. Not For SS Cars. Tailpipes Exit Out The Side. Includes Race Pro Mufflers.