Deal of the Day:

Hardware Metal Plate

 - Furniture Leg Mounting Plates, Sofa Leg Attachment Plates, 5/16
Furniture Leg Mounting Plates, Sofa Leg Attachment Plates, 5/16" Hanger Bolts Screws Adapters, Metal Plates Bracket, Repair kit for Couch Chair (Set of

All accessories you need to install of repair the furniture legs are included in the kit, so you don't need to run to local hardware store 3 times. 4x flat mounting plates 4x 5/16 inch threaded insert nuts fasteners 16x screws for fastening the mounting plates Functional repair kit for furniture legs: To fix the loose old legs, for you to sit securely and tight. To add strength to the furniture, no more wobbly couches. To install the new furniture legs, get a new look or raise the height for your need. To retrofit and extend the life of the old couch, love seat. To convert European furniture feet To U.S standard measurements Easy to use: You may not need all the accessories. The extra tool you need is a screwdriver. For Installation of new legs: If you are installing new furniture legs, which are already attached with hanger bolt, then follow these steps.Drill a hole a little over a half inch deep where the leg was to go and screw in the female insert nuts, then add the plate to the right position, screw in the bolts on the legs into the plate and the insert nuts. Give it a strong, tight fit.

  • Brand: Sopicoz
  • ASIN: B07MR21BCK
 - Anwenk Leg Mounting Plates, Furniture Leg Attachment Plates Industrial Strength T-Plate 5/16
Anwenk Leg Mounting Plates, Furniture Leg Attachment Plates Industrial Strength T-Plate 5/16" (M8) Sofa Legs with Hanger Bolts,Screws |Strengthen Weak Furniture Repair Damaged Sofa Couch Seat,Set of

When You Will Need Furniture Legs Attachment Mounting Plate Attachment points on furniture are damaged or missing the threaded nut ,T-Nut become loose or cannot be installed that your furniture becomes so weak and wobbly. These leg attachment plates can help repair and strengthen your furniture by simply attaching them over the existing hole in the leg frame for standard 5/16"(metric 8mm) center to accept your furniture legs. Convert Furniture from M10 to U.S. Standard M8 Holes Some European imported furniture (Ikea, Natuzzi, etc.) pre-drilled sofa legs with M10(10mm) wide bolt. While U.S. standard is 5/16" (Known as M8)wide bolt. Using a set of T-Plates centered over the existing hole in your furniture and you can adapt your furniture to accept M8 hanger bolts. Note: These T-plates are 2" by 2" and fit most sofa/couches/seats/ottomans in market because they can fit over existing and damaged holes in the frame. They do not fit for large legs which the pre-drilled holes are over 2" by 2". What You Get 4 X sofa leg mounting plates 4 X 5/16" (M8) hanger bolts 4 X 5/16" (M8) female adaters 16 x screw adapters for 5mm unthreaded holes

  • Color: M8 Leg Mounting Plates
  • Brand: Anwenk
  • ASIN: B01HTWQFKA
  • Part No: FurnitureLeg-M8
 - Anndason 8 Sets Furniture Leg Mounting Plates with Hanger Bolts Screws Great for Furniture Sofas Couches Seats (Black)
Anndason 8 Sets Furniture Leg Mounting Plates with Hanger Bolts Screws Great for Furniture Sofas Couches Seats

Anndason 8 Sets Furniture Leg Mounting Plates with Hanger Bolts Screws Great for Furniture Sofas Couches Seats. Size:Mounting Plates size:48mm*48mm*2mm Colour:Black Use: sofas, couches, seats, cupboard,ottomans and more. This furniture leg attachment plates are designed for attaching legs to new or damaged sofas, couches, seats, ottomans and more. Easy to install, sofa leg mounting plate sets protect the furniture legs effectively, make your furniture more durable. Furniture Leg Mounting Plates can be applied to repair the furniture when the sofa are damaged and missed the threaded nut, or the T-nuts have wiggled loose and won't stay in place Complete accessories, No need to purchase hanger bolts separately. You can follow the plan to install immediately. Package includes: 8 x Sofa leg mounting plates 8 x M8 female adapters 8 x M8 hanger bolts 32 x Screw adapters for 5 mm unthreaded holes Note: These T-plates are 2 by 2 inch and fit to most sofa in market because they can fit over existing and damaged holes in the frame. They do not fit for large legs which the pre-drilled holes are over 2 by 2 inch.

  • Color: Black
  • Brand: Anndason
  • ASIN: B07KP1VXM6
  • UPC: 631145409221
 - Leg Daddy 5/16
Leg Daddy 5/16" T-Plate Sofa Leg Attachment Plates, Set of

T-Plate Purpose Designed for attaching sofa legs to new or damaged sofas, couches, love seats, and ottomans. These plates have 5/16" Threaded centers for easily attaching hanger-bolt style legs, and they attach to your sofa with four screws placed directly into the wood frame of the couch. The Solution for Damaged Hangar Bolt Sofa Leg Attachment Points If your sofa is so damaged that a T-Nut will not attach to your sofa, we recommend the T-Plate Sofa Leg Attachment Plate. This plate installs on your sofa over the old T-Nut hole. These plates have 5/16" threaded centers for easily attaching hanger-bolt style legs. They attach to your sofa with three screws placed directly into the wood frame of the couch. Your standard 5/16" hanger bolt sofa leg will then screw into the threaded 5/16" center of the T-Plate. Can Be Used in Place of T-Nuts If your existing T-Nuts have worked loose and your legs won't stay in place, this is a great option for repairing the sofa and keeping your legs in place.

  • Brand: Leg Daddy
  • ASIN: B00EAYNXB0
  • UPC: 795654973809
  • Part No: 118*44N18ZP
 - Richohome Wood Bed Rail Hook Plates - Pack of 4
Richohome Wood Bed Rail Hook Plates - Pack of

Please make your bed rails are compatible with 2" hook seperation design.

  • Color: Gold
  • Brand: Richohome
  • ASIN: B01KVLUPDE
  • UPC: 723576199304
  • Part No: HookPlates
 - Mudder Leg Mounting Plates with Hanger Bolts Screws Adapters for Furniture Sofas Couches Seats, 28 Pieces
Mudder Leg Mounting Plates with Hanger Bolts Screws Adapters for Furniture Sofas Couches Seats, 28

Mudder leg mounting plates with hanger bolts screws adapters for furniture sofas couches seats, 28 pieces 4 Sets of sofa leg mounting plate 4 Pieces of 5/ 16 inch (M8) hanger bolts; 4 Pieces of 5/ 16 inch (M8) female converters; 16 Pieces of screw adapters for 5 mm unthreaded holes. Furniture leg attachment set Nice set to reinforce weak or loose legs on furniture, or you can install new legs to replace the older furniture. These plates can be applied to repair the furniture when the sofa are damaged and missed the threaded nut, or the T-nuts have wiggled loose and won't stay in place. Furniture to apply This furniture leg attachment plates can attach legs to new or damaged sofas, couches, seats, ottomans, etc. Convenient to install No need to purchase compatible hanger bolts and the other screws, you can raise the height of your sofa to replace the legs screw with this matched item. Package includes: 4 x Sofa leg mounting plates 4 x M8 female adapters 4 x M8 hanger bolts 16 x Screw adapters for 5 mm unthreaded holes Note: These T-plates are 2 by 2 inch and fit to most sofa in market because they can fit over existing and damaged holes in the frame. They do not fit for large legs which the pre-drilled holes are over 2 by 2 inch.

  • Brand: Mudder
  • ASIN: B01MSVLS6C
  • UPC: 713072679578
  • Part No: Mudder-Leg Mounting Plates-01
 - 4
4" Swivel Plate Caster Wheels, PRITEK Heavy Duty Metal Caster Wheels Lock the Top Plate and the Wheels Replacement for Industrial Trailer or Large Home Furniture (bearing 250lbs each, set

Features: Lockable, each caster has its own brake -- Effective to stop the device when there is no body to hold it, and prevent it hurting others. 360 Degree swivel, roll smoothly -- Easy to transform to any directions that you want. Quite rubber base wheels -- Don't worry to awake your baby or disturb others when move your furnitures that with the plate casters. Widely use -- Perfect for furniture, including coffee table, plant stands, bookshelves, shoe bins, toy bins, underbed storage, shopping carts, workbench. Save strength -- If the furniture has caster wheel, you will be very easy to move them when change house or doing cleaning. Specification: Material: Rubber Wheel, Steel Top Plate Wheel Diameter: 3.74inch/9.5cm Wheel Width: 1.18inch/3cm Top Plate Size: 2.55x3.74inch/6.5x9.5cm Total Height: 5.11inch/13cm Load Capacity: 750LB (250*3) Package Content: 4 x Casters (no screws) Notice: 1.Please allow slight measurement deviation for the data. 2.Please contact me feel free if you have any hesitation about the product.

  • Color: Black
  • Brand: PRITEK
  • ASIN: B07423NB6K
  • Part No: PT-INCH-004
 - 11 Degree Angled Leg Mounting Plates, Furniture Leg Attachment Plates Industrial Strength T-Plate M8 Sofa Legs with Hanger Bolts,Screws,Set of 4
11 Degree Angled Leg Mounting Plates, Furniture Leg Attachment Plates Industrial Strength T-Plate M8 Sofa Legs with Hanger Bolts,Screws,Set of

When You Will Need Furniture Legs Attachment Mounting Plate Attachment points on furniture are damaged or missing the threaded nut ,T-Nut become loose or cannot be installed that your furniture becomes so weak and wobbly. These leg attachment plates can help repair and strengthen your furniture by simply attaching them over the existing hole in the leg frame for standard 5/16" center to accept your furniture legs. Convert Furniture from M10 to U.S. Standard M8 Holes Some European imported furniture (Ikea, Natuzzi, etc.) pre-drilled sofa legs with M10(10mm) wide bolt. While U.S. standard is 5/16" (Known as M8)wide bolt. Using a set of T-Plates centered over the existing hole in your furniture and you can adapt your furniture to accept 5/16" hanger bolts. Note: They are not straight but 11 degree angled let mounting plates.Search"B01HTWQFKA" for straight leg mounting plates. These T-plates are 2" by 2" and fit most sofa/couches/seats/ottomans in market because they can fit over existing and damaged holes in the frame. They do not fit for large legs which the pre-drilled holes are over 2" by 2". What You Get 4 X sofa leg mounting plates 4 X 5/16" (M8) hanger bolts 4 X 5/16" (M8) female adaters 16 x screw adapters for 5mm unthreaded holes

  • Color: Silver
  • Brand: Anwenk
  • ASIN: B071DJQFY5
  • Part No: LegMountingPlates-Angled
 - VintageBee 60PCS Metal L Shaped Flat Fixing Mending Repair Plates Corner Brace Brackets (2
VintageBee 60PCS Metal L Shaped Flat Fixing Mending Repair Plates Corner Brace Brackets (2" x 2" x

VintageBee 60PCS Metal L Shaped Flat Fixing Mending Repair Plates Corner Brace Brackets (2" x 2" x 0.04")

  • Brand: VintageBee
  • ASIN: B07K9PXMJP
  • UPC: 723990976444
 - uxcell 1.5mm Thickness Metal Flat Straight Mending Plates Fixing Corner Brace 20pcs
uxcell 1.5mm Thickness Metal Flat Straight Mending Plates Fixing Corner Brace

Feautures: 60mm (length) x 38mm (width) x 1.5mm (thickness).This flat fixing plate is an important fasterner to make furniture stay firm.Type: Flat (Straight)The corner brace plate made of good metal.Design allows for easy repair of household items.Ideal for connecting furniture joint corner board.You need some screws for fixing, but here not included.

  • Color: Silver Tone
  • Brand: uxcell
  • ASIN: B01NA68YBQ
  • UPC: 602451682493
  • Part No: a16041400ux0742
 - Waddell Straight Top Hardware Plate, 2751A
Waddell Straight Top Hardware Plate,

The product is easy to use. The product is highly durable and handle. The product is manufactured in china.

  • Color: Silver
  • Brand: Waddell
  • ASIN: B000BQUHO2
  • UPC: 038453027510
  • Part No: 2751A
 - AmazonBasics Single Gang Wall Plate, Oil Rubbed Bronze,, 3-Pack
AmazonBasics Single Gang Wall Plate, Oil Rubbed Bronze,,

AmazonBasics switch plates are made from durable zinc-alloy and are hand finished to ensure a uniform look amongst all styles and sets. Backed with a 1-Year warranty, AmazonBasics switch plates are ideal for redesigning any kitchen, bath, home or office. An Amazon Brand.

  • Color: Oil-Rubbed Bronze
  • Brand: AmazonBasics
  • ASIN: B01MS9NV9T
  • UPC: 841710164824
  • Part No: 0
 - Shepherd Hardware 9174 2-Inch Cast Iron Swivel Plate Caster, 125-lb Load Capacity
Shepherd Hardware 9174 2-Inch Cast Iron Swivel Plate Caster, 125-lb Load

2", Steel Wheel Swivel, Plate Caster, 125 LB Load Capacity, Cast Iron Wheels Have An Exceptionally Long Wear Life, Can Withstand Temperature Extremes, Recommended For Infrequently Moved Objects On Rough Wood & Concrete Floors, Bulk.

  • Color: Silver
  • Brand: Shepherd Hardware
  • ASIN: B000H5QGYW
  • UPC: 689967805776
  • Part No: 9174
 - Tapped Corners and Back Plates for Metal Picture Frames - 100 Each
Tapped Corners and Back Plates for Metal Picture Frames - 100

Tapped corners and back plates are used in conjunction to join corners of metal frames. Compatible with most common metal frame profiles, including Nielsen, Clark, and Alumiframe. Package of 100 tapped corners and 100 back plates provide enough hardware to join 25 metal picture frames.

  • Brand: Picture Hardware Co.
  • ASIN: B01FMUFA0C
  • UPC: 027829620479
  • Part No: 027829620479
 - DIY CARTEL Industrial Forged Steel Floating Shelf J Bracket with Lip - Heavy Duty Rustic Shelf Brackets- Raw Metal/Steel Floating Shelf Hardware - 2 Pack Wall Mount Shelf Brackets (11 3/8 x 6-inch)
DIY CARTEL Industrial Forged Steel Floating Shelf J Bracket with Lip - Heavy Duty Rustic Shelf Brackets- Raw Metal/Steel Floating Shelf Hardware - 2 Pack Wall Mount Shelf Brackets (11

Successfully Attain Interior Décor That Even Top Designers And Architects Would Envy! Would you like to make your personal space magazine worthy by adding a stylish, industrial, chic, modern yet rustic touch most high-end establishments pay top dollar for, at a fraction of the cost? Introducing The Forged Steel Floating Shelf J Brackets With Lip By DIY CARTEL!
Proudly made in the USA from top quality raw metal, our heavy duty shelf brackets are perfect for both industrial and commercial use. Industrial strength construction ensures high durability, making our shelf brackets the most sturdy and stylish hardware you can use in your kitchen, garage, home, business or office. 4 conveniently pre-made holes guarantee that you can install our metal brackets within minutes, hassle free, no matter if you are a professional or not! Why Our Heavy Duty Steel Brackets (2 Pack) Are The Ideal Choice:  You can place almost anything you want safely on your shelf as they can hold upwards of 60+lbs when mounted into a stud. 
  The base that attaches to the wall is 6 -inches long which guarantee your shelf will remain secure and not tip. 
  With +11 inches of shelf space they are perfect for a shelf with the width of 11 - 11 3/8" x 1.5-3 inches thick. 
 Coming With A Money Back Gu...

  • Color: Raw Industrial Steel
  • Brand: DIY CARTEL
  • ASIN: B07F4B6YPV
  • UPC: 703980635834
Hardware Metal Plate - Elumina™ Décor™ Cast Metal White Wallplate
Elumina™ Décor™ Cast Metal White

    The Continental Cast Metal Double Toggle Light Switch Cover features a simple design that blends well with any decor.
Hardware Metal Plate - Elumina??? D??cor??? Cast Metal White Wallplate
Elumina??? D??cor??? Cast Metal White

    The Continental Cast Metal Toggle Light Switch Cover features a simple design that blends well with any decor.
Hardware Metal Plate - GlideRite Hardware Single Rocker 1-Gang Beveled Edge Wall Plate Cover, Brushed Nickel
GlideRite Hardware Single Rocker 1-Gang Beveled Edge Wall Plate Cover, Brushed

    GlideRite Hardware line of wall plates will improve the look of your outlets and switches and add value to your home. Each plate is stamped from premium grade steel and finished with a brushed satin nickel finish.Item Information:Dimensions: 5 inch Length x 3-1/4 inch WidthFinish: Brushed NickelMaterial: Steel
Hardware Metal Plate - Ultra Hardware 58399 3 1/2
Ultra Hardware 58399 3 1/2" Satin Nickel Scar Cover

    This hardware is durable enough to offer years of functionality!
Hardware Metal Plate - Liberty Hardware 126301 Architectural Single Switch Wall Plate, Polished Chrome
Liberty Hardware 126301 Architectural Single Switch Wall Plate, Polished

    Liberty Hardware 126301 Architectural Single Switch Wall Plate, Polished Chrome
Hardware Metal Plate - Leviton Sunflowers Painted Metal Light Switch Wallplate Cover 89001-SFL
Leviton Sunflowers Painted Metal Light Switch Wallplate Cover

    Leviton 89001-SFL sunflower design painted metal toggle switch wallplate. Special oversize dimensions, measuring 5.25"h x 3.50"w. Easy to clean, smooth finish with Rounded Edges. A decorative alternative to standard plates and matching mounting screws are included.
Hardware Metal Plate - GlideRite Hardware Toggle Light Switch and Decora Rocker Beveled Wall Plate Cover, Brushed Nickel
GlideRite Hardware Toggle Light Switch and Decora Rocker Beveled Wall Plate Cover, Brushed

    GlideRite Hardware line of wall plates will improve the look of your outlets and switches and add value to your home. Each plate is stamped from premium grade steel and finished with a brushed satin nickel finish.Item Information:Dimensions: 5 inch Length x 4-1/2 inch WidthFinish: Brushed NickelMaterial: Steel
Hardware Metal Plate - Hardware Parts Square Plate Silver Tone Metal Glass Door Drawer Lock w Keys
Hardware Parts Square Plate Silver Tone Metal Glass Door Drawer Lock w

    Hardware Parts Square Plate Silver Tone Metal Glass Door Drawer Lock w Keys.For CALIFORNIA residents only: WARNING: This product contains chemicals including DEHP, which is known to the State of California to cause cancer and birth defects or other reproductive harm.Please note that by posting this Proposition 65 warning, we are notifying you that one or more of the Proposition 65 listed chemicals may be present in a product. With Unique Bargains' products, the exposure to these chemicals may be of no significant risk to you, but out of caution, we have elected to place this warning on our site to make sure our customers are informed.You can find more infomation at http://www.oehha.ca.gov/proposition-65/about-proposition-65.
Hardware Metal Plate - GlideRite Hardware Triple Rocker 3-Gang Beveled Edge Wall Plate Cover, Brushed Nickel
GlideRite Hardware Triple Rocker 3-Gang Beveled Edge Wall Plate Cover, Brushed

    GlideRite Hardware line of wall plates will improve the look of your outlets and switches and add value to your home. Each plate is stamped from premium grade steel and finished with a brushed satin nickel finish.Item Information:Dimensions: 5 inch Length x 6-3/8 inch WidthFinish: Brushed NickelMaterial: Steel
Hardware Metal Plate - CENTOCO GR802-HARDWARE Toilet Seat Hardware, Plated Metal
CENTOCO GR802-HARDWARE Toilet Seat Hardware, Plated

    CENTOCO GR802-HARDWARE Toilet Seat Hardware, Plated Metal
Hardware Metal Plate - GlideRite Hardware Double Rocker 2-Gang Beveled Edge Wall Plate Cover, Brushed Nickel
GlideRite Hardware Double Rocker 2-Gang Beveled Edge Wall Plate Cover, Brushed

    GlideRite Hardware line of wall plates will improve the look of your outlets and switches and add value to your home. Each plate is stamped from premium grade steel and finished with a brushed satin nickel finish.Item Information:Dimensions: 5 inch Length x 4-1/2 inch WidthFinish: Brushed NickelMaterial: Steel
Hardware Metal Plate - Liberty Hardware 126299 Architectural Single Duplex Wall Plate, Polished Chrome
Liberty Hardware 126299 Architectural Single Duplex Wall Plate, Polished

    Liberty Hardware 126299 Architectural Single Duplex Wall Plate, Polished Chrome
Hardware Metal Plate - Oval Shaped Turnlock Case Clasp Metal Handbag Bag and Purse Closure Hardware Nickel Plated
Oval Shaped Turnlock Case Clasp Metal Handbag Bag and Purse Closure Hardware Nickel

    Nickel finish. 1" x 3/4".
Hardware Metal Plate - Rok Hardware Wall Plate Contemporary Decorative Quadruple Receptacle Outlet Brushed Nickel
Rok Hardware Wall Plate Contemporary Decorative Quadruple Receptacle Outlet Brushed

    This contemporary receptacle switch plate cover fits standard outlets.Finish: Brushed NickelWidth: 4-27/32" (123 mm)Height: 4-27/32" (123 mm)Material : MetalProjection: 1/4" (6.5 mm)Screw Included
Hardware Metal Plate - GlideRite Hardware Double Toggle Light Switch 2-Gang Wall Plate Cover, Brushed Nickel
GlideRite Hardware Double Toggle Light Switch 2-Gang Wall Plate Cover, Brushed

    GlideRite Hardware line of wall plates will improve the look of your outlets and switches and add value to your home. Each plate is stamped from premium grade steel and finished with a brushed satin nickel finish.Item Information:Dimensions: 5 inch Length x 4-1/2 inch WidthFinish: Brushed Nickel Material: Steel